Selenium Dioxide-manufacture,factory,supplier from China

1. Product description:Product nameSelenium dioxideCAS7446-08-4MFSeO2MW110.96EINECS231-194-7Melting point315 °CBoiling point684.9 °C(lit.)Density4.81 g/mL at 25 °C(lit.)Solubility38.4 g/100 mL (14 ºC)StorageStore below +30°C.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical int

1. Product description:Product nameSilicon DioxideCAS14808-60-7MFSiO2MW60.08EINECS215-684-8Melting point1610 °C(lit.)Stability2230 °CDensity2.6 g/mL at 25 °C(lit.)StorageStorage temperature: no restrictions.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemi

1. Product description:Magnesium carbonate, molecular weight 84.31. White granular powder. It decomposes at 350°C and loses carbon dioxide at 900°C. Slightly soluble in cold water, slowly soluble in acid. Its trihydrate is a colorless needle-like crystal, with a melting point of 1Chemicalbook 65°C and a relative density of 1.850. The pentahydrate is a white monoclinic crystal with a relative density of 1.73, which is decomposed by heating in the air. Carbon dioxide can be added into the magnesium salt aqueous solution while sodium carbonate is added to obtain a hydrate.

1. Product description:Barium carbonate, chemical formula BaCO3, molecular weight 197.35. Hexagonal fine crystals or white powder. It is insoluble in water, with a density of 4.43 g/cm3, and a melting point of 1740°C (8820 kPa-Chemicalbook 90 atmospheres). Decomposes at 1450°C and emits carbon dioxide. Slightly soluble in water containing carbon dioxide, but also soluble in ammonium chloride or ammonium nitrate solution to form a complex, dissolved in hydrochloric acid and nitric acid to release carbon dioxide.

1. Product description:Sodium sulfite is an inorganic compound. It is a white granular powder at room temperature with the odor of sulfur dioxide, stable when dry, and sensitive to moisture. It is soluble in water and glycerin, but insoluble in ethanol. The aqueous solution is alkaline. Its aqueous solution is alkaline to litmus paper and phenolphthalein. It reacts with acid to produce toxic sulfur dioxide gas. The pH of 1Chemicalbook% aqueous solution is 8.3~9.4, with strong reduction sex.

1. Product description:White crystal, crystalline powder or colorless hexagonal crystal. Odorless and tasteless. The relative density is 2.68; it has moisture absorption. Soluble in solvents such as ether, but insoluble in alcohol. The solubility in acid is greater than that in water. It decomposes in lye to produce sodium fluoride and silicon dioxide. After burning (300°C), it decomposes into sodium fluoride and silicon tetrafluoride. poisonous! The solubility of sodium fluorosilicate in water is 0.78% at 25 degrees.

Magnesium oxide is commonly known as bitter soil, also known as magnesia. Is a typical alkaline earth metal oxide, chemical formula MgO. It is a white powder with a melting point of 2852°C, a boiling point of 3600°C, and a relative density of 3.58 (25°C). Soluble in acid and ammonium salt solution. Slowly react with water to generate magnesium hydroxide. It can be dissolved in carbon dioxide aqueous solution to generate magnesium bicarbonate. It can gradually absorb moisture and carbon dioxide in the air, and emit irritating smoke when heated.

1. Product description:Strontium carbonate, chemical formula SrCO3, molecular weight 147.63. Colorless prismatic crystal or white powder. At 926℃, it is converted to hexagonal crystal system. Melting point 1497℃(6.08×106Pa), relative density 3.70. Slightly soluble in water, slightly soluble in saturated solutions of carbon dioxide, soluble in ammonium chloride, ammonium nitrate and carbonic acid solutions. Carbon dioxide is produced by interaction with dilute hydrochloric acid, nitric acid and acetic acid. It begins to decompose at 820℃, and gradually loses carbon dioxide at 1340℃.

1. Product description:Potassium carbonate is also known as potash. Its appearance is colorless crystals or white particles. It is easily soluble in water and its solution is strongly alkaline. Cooling its saturated aqueous solution, a glassy monoclinic crystal hydrate 2K2CO3·3H2O crystals separate, with a density of 2.043, and it loses crystal water at 100°C. Insoluble in ethanol, acetone and ether. It is highly hygroscopic and can absorb carbon dioxide and moisture when exposed to the air Chemicalbook, and transform it into potassium bicarbonate.

1. Product description:Sodium salicylate is a sodium salt of salicylic acid. It can be prepared from sodium phenolate and carbon dioxide under higher temperature and pressure. Historically, it has been synthesized from methyl salicylate (found in wintergreen plants or the bark of sweet birch tree) by reacting it with an excess of sodium hydroxide and heating it under reflux.It is used in medicine as an analgesic and antipyretic. Sodium salicylate also acts as non - steroidal anti - inflammatory drug (NSAID), and induces apoptosis in cancer cells and also necrosis.

1. Product description:Ferric chloride is a black-brown hexagonal crystal, which is garnet red under transmitted light, and metallic green under reflected light. Easily soluble in water, methanol, ethanol, acetone and ether. Soluble in liquid sulfur dioxide, Chemicalbook phosphorus tribromide, phosphorus oxychloride, ethylamine, aniline, slightly soluble in carbon disulfide, insoluble in glycerin. Mainly used as water treatment agent, also used as mordant, catalyst, chlorinating agent, and used to make other iron salts.Black-brown hexagonal crystals.

1. Product description:Potassium hydroxide is commonly known as caustic potassium, potassium ash, etc. Industrial products mainly come in two forms, solid and liquid. The solid is white or light gray flakes or blocks, and the liquid potassium hydroxide is a light yellow liquid. The chemical properties are similar to that of sodium hydroxide. It is highly alkaline and corrosive. It is easily soluble in water and emits a lot of heat. It is also deliquescent. It can easily absorb moisture in the air and deliquescence. It is formed by absorbing carbon dioxide from Chemicalbook.

1. Product description:Sodium hydroxide, the chemical formula for NaOH, commonly known as caustic soda, caustic soda, caustic soda, to have a caustic alkali, generally to sheet or block form, soluble in water, soluble in water heating) and formation of alkaline solution, otherwise deliquescence, easy to absorb water vapor in the air (deliquescence) and carbon dioxide (bad), can be in a hydrochloric acid test of whether metamorphism.NaOH is one of the essential chemicals in the chemical laboratory and one of the common chemicals. A pure product is a clear, colorless crystal.

1. Product description:Glycerol is colorless, odorless and sweet. Its appearance is clear, viscous and liquid. It is an organic substance. It is commonly known as glycerin. Glycerol absorbs moisture from air and absorbs hydrogen sulfide, hydrogen cyanide and sulfur dioxide. It is difficult to dissolve in benzene, chloroform, carbon tetrachloride, carbon disulfide, petroleum ether and oil. Glycerol is the skeleton component of triglycerides.Glycerol can be esterified with acid, such as esterification with benzene two formic acid to form alkyd resin.

1. Product description:Sodium pyrophosphate, also called Tetrasodium pyrophosphate or TSPP is used in the laboratory as a buffering agent. The compound has been shown to be useful in the preparation of an EDTA-sodium pyrophosphate extraction buffer for microcystin analysis of soil samples. Tetrasodium pyrophosphate is an odorless, white powder or granules. It is used in water softener, buffering agent, thickening agent, dispersing agent, wool de-fatting agent, metal cleaner, soap and synthetic detergent builder, general sequestering agent, in electrodeposition of metals.

1. Product description:Product namep-HydroxybenzaldehydeCAS123-08-0MFC7H6O2MW122.12EINECS204-599-1Melting point112-116 °C (lit.)Boiling point191°C 50mmDensity1,129 g/cm3Flash point174°CStorageStorage at RTFormPowderColorLight YellowPackage25kg/bag 2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and

1. Product description:Diethylene glycol, also known as diethylene glycol, produces esters when it reacts with acid anhydrides. It reacts with alkyl sulfates or halogenated hydrocarbons to generate ethers. It is mainly used as a gas dehydrating agent and extractant, and also as a lubricant and finishing agent for textiles. It is derived from the action of ethylene oxide and ethylene glycol. Diethylene glycol has been widely used in various cosmetics as a solvent, heat preservation agent, and viscosity control agent.

1. Product description:Polyethylene glycol is abbreviated as "PEG". Ethylene glycol is a polymer compound formed by intermolecular dehydration and condensation. Chemical formula HOCH2(CH2OCH2)nCH2OH. Where n is greater than 4. The average molecular weight of Chemicalbook is 200-7000. The number after the commercial polyethylene glycol indicates the average molecular weight. For example, polyethylene glycol-400 means that the average molecular weight of the commercial polyethylene glycol is about 400.Colorless viscous liquid or white solid. Low toxicity!

1. Product description:Ethylacrylate, abbreviated as EA, is a colorless and volatile liquid with a pungent odor. It can be used as an important component of synthetic adhesives, coatings, plastics and textile auxiliaries. Ethyl acrylate can also be used as a polymer synthetic material monomer. The copolymer with ethylene is a hot-melt adhesive; the copolymer with 5% chloroethyl vinyl ether is a kind of oil and heat resistance. Synthetic rubber, can replace nitrile rubber in some Chemicalbook situations.

1. Product description:Product namePotassium pyrophosphateCAS7320-34-5MFK4O7P2MW330.33EINECS230-785-7Melting point1090℃PH(40g/l, 25℃) : 10.0~11.0Density2.33StorageStore at room temperature.FormPowderColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemical raw materials.

1. Product description:Product namePotassium AcrylateCAS10192-85-5MFC3H3KO2MW110.15EINECS233-473-9Melting point194°CFlash point11°C (52°F)StorageStorage at RTFormCrystallineColorWhitePackage25kg/bagApplicationPotassium acrylate is an organic cationic polymer, non-toxic, non corrosive, not easy to produce dust, easily soluble in water, coated and tacked in drilling, suitable for various mud systems and has a good anti sloughing effect.2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterpr

1. Product description:Product namePotassium triphosphateCAS13845-36-8MFH6KO10P3MW298.06EINECS237-574-9Melting point620°CDensity2,54 g/cm3StorageStore at room temperature.FormCrystallineColorWhitePackage25kg/bag2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical intermediates, daily chemicals and other chemical raw materials.

1. Product description:Product nameDexpanthenolCAS81-13-0MFC9H19NO4MW205.25EINECS201-327-3Melting point64~69℃Boiling point118-120 °C (2.7 mmHg)Density1.20 g/mL at 20 °C (lit.)Flash point118-120°C/0.02mWater solubilitysolubleFormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical

1. Product description:Product nameDecyl alcoholCAS112-30-1MFC10H22OMW158.28EINECS203-956-9Melting point5-7 °C (lit.)Boiling point231 °C (lit.)Density0.829 g/mL at 25 °C (lit.)Flash point180 °FStorageStore below +30°C.FormLiquidColorColorlessPackage1L/Bottle 200L/drum or 1000L/drum2. Company introduction:Shenyu Energy(Shandong) Development Co., Ltd is Located in the beautiful spring city, Ji'nan Shandong, is a new enterprise integrating production, sales and service.Our products mainly include organic chemicals, inorganic chemicals, food additives, pharmaceutical i